Booking carpet cleaning machine hire in Melbourne should be simple. Pick a machine, choose your dates and get on with the job. Zintra Equipment rents commercial-grade carpet cleaning machines from $60 per day, with free delivery within 20km of our Cranbourne location and flexible daily, weekly and monthly hire terms.
This guide covers the machines we offer, what they cost per day, the jobs they suit and how to get a clean result the first time. It is written for office managers, property managers, hospitality teams, aged care providers and anyone handling an end of lease clean.
Carpet Cleaning Machine Hire Melbourne Businesses and Property Managers Can Rely On
Carpet takes the brunt of daily life in a workplace. Foot traffic grinds dirt into the fibre, spills settle in, and the same corridor gets walked hundreds of times a week. A hired extraction machine lets you deal with all of that on your own schedule, whether that is a quiet Sunday morning in an office or the gap between two events at a venue.
Jobs a Hired Carpet Cleaner Handles Well
Our carpet cleaning machine is suited to carpet steam cleaning, upholstery and sofa cleaning, office and commercial carpet cleaning, end of lease carpet cleaning, vehicle interior detailing and residential carpet cleaning. One machine, a lot of different surfaces.
The SteamVac Max 600 portable carpet extractor is built for deep cleaning carpets, upholstery and high-traffic commercial areas. It is also used in hospitality and aged care settings and for flood recovery and water extraction.
Three Machines to Choose From
Each machine suits a different type of job. The table below shows how they compare.
| Machine | Best for | Key specifications | Daily rate |
| Carpet Cleaning Machine | Offices, end-of-lease jobs, upholstery, vehicle interiors | Commercial-grade steam extraction, powerful suction, compact and easy to transport | $60 |
| SteamVac Max 600 Portable Carpet Extractor | High traffic commercial carpet, hospitality, aged care, water extraction | Adjustable 0 to 600 PSI, twin 1200W two-stage vacuum motors, 55L solution tank, 55L waste tank, made in Australia | $90 |
| SteamVac Max HP 1600 Tile and Grout System | Tile, grout, commercial kitchens, bathrooms | Adjustable 0 to 1600 PSI, dual 3-stage motors, 55L tanks with auto fill and auto dump, high-pressure hard floor spinner tool | $130 |
The entry-level carpet cleaning machine is the practical pick for most offices and end-of-lease jobs. It has powerful suction for faster drying, simple setup and quick start operation, and it fits in most vans, SUVs and trailers.
Step up to the SteamVac Max 600 when the carpet is larger, or the traffic is heavier. The adjustable pressure and the two 55L tanks give you more control over the job.
Hire Rates and What Changes the Total
Daily rates start at $60 for the carpet cleaning machine, $90 for the SteamVac Max 600 and $130 for the SteamVac Max HP 1600. Your final total depends on which machine you choose, how many days you need it, and whether your site sits outside our free delivery area.
Need it for a whole week or a longer refurbishment? Our hire terms are flexible across daily, weekly and monthly periods, so ask for a quote, and we will work it out around your dates.
Delivery Across Melbourne
We are based in Cranbourne and offer free delivery within 20km of our location. Greater Melbourne delivery is available on request. If your site is further out, just tell us the address when you book.
Our team is also available for support throughout your hire, day or night. If something is not behaving on a Saturday afternoon, you are not left guessing.
Preparing the Carpet Before You Start
A little preparation makes the machine work harder for you. Vacuum the area thoroughly first so the extractor is lifting embedded dirt rather than loose surface debris. Clear furniture where you can. Treat obvious stains before the first pass.
Always test the cleaning solution on a hidden corner of the carpet before you commit to the whole room. It takes a minute and can save you from a colour or residue problem across an entire floor.
Working Through a Room Without Soaking It
Work in overlapping lanes and finish at the exit so you are never standing on carpet you have just cleaned. Move slowly on the suction stroke. Slow passes lift more water and more dirt than fast ones.
Once the solution pass is done, run a few extra dry passes to pull out as much moisture as possible. Open windows or run air movement if you can. Over-wetting is the most common mistake, and it leads to longer drying times and can leave residue behind. Drying time will vary with the carpet, the room, and the airflow.
Tile, Grout and Wet Area Add-Ons
Some jobs are not only carpet. The SteamVac Max HP 1600 is designed for commercial kitchens, bathrooms, warehouse offices and residential renovations, using adjustable pressure up to 1600 PSI to lift dirt from grout lines and porous tiles while it cleans and dries the surface.
For spills and general pick-up, add our 90L wet and dry vacuum to the same booking. If the site also has a large hard floor, our industrial floor scrubber rental guide and floor scrubber hire cost guide will help you plan that side of the job.
Booking in Three Steps
Start by choosing the machine that fits the job from our rental equipment range. Next, complete the online booking form with your dates and delivery address, or call us if you would rather talk it through. Then we deliver, you clean, and you finish on your own timeline.
Conclusion
Hiring a carpet cleaning machine puts professional-style extraction in your hands without a long commitment. With three machines at $60, $90 and $130 per day, free delivery within 20km of Cranbourne and flexible hire terms, Zintra Equipment makes it easy to match the machine to the job. Prepare the carpet, take slow passes, extract as much water as you can, and let the room dry properly.
Call Zintra Equipment on 0422 869 978 or email sales@zintraequipment.com.au to check availability and get a quote. You can also book your carpet cleaning machine online or browse the full rental equipment range before you decide.
Frequently Asked Questions About Carpet Cleaning Machine Hire
How much does carpet cleaning machine hire cost in Melbourne?
At Zintra Equipment, hire starts at $60 per day for our carpet cleaning machine. The SteamVac Max 600 portable carpet extractor is $90 per day, and the SteamVac Max HP 1600 tile and grout system is $130 per day. Weekly and monthly terms are available, so ask for a quote if you need a machine for longer.
Do I need training to use a carpet cleaning machine?
Our carpet cleaning machine is easy to operate and needs no special training. It has a simple setup and quick start operation, so you can get straight to work.
Can I hire a carpet cleaning machine for an end of lease clean?
Yes. End-of-lease carpet cleaning is one of the jobs our carpet cleaning machine is made for. It is worth checking what your property manager or agent expects before you start.
Can the machine clean upholstery, sofas and car interiors?
Yes. Our carpet cleaning machine is suited to upholstery and sofa cleaning and vehicle interior detailing, as well as carpet. The SteamVac Max 600 is also listed for upholstery and vehicle interiors.
Do you deliver carpet cleaning machines in Melbourne?
We deliver free within 20km of our Cranbourne location. Greater Melbourne delivery is available on request.
What is the difference between the carpet cleaning machine and the SteamVac Max 600?
Both extract dirt and moisture from carpet. The SteamVac Max 600 adds adjustable pressure from 0 to 600 PSI, twin 1200W two-stage vacuum motors, and 55L solution and waste tanks, which makes it well suited to high-traffic commercial areas. The $60 carpet cleaning machine is compact, easy to transport, and a good match for offices, upholstery, and end-of-lease jobs.
How long can I hire a carpet cleaning machine for?
You can hire by the day, the week, or the month. Tell us your dates, and we will confirm the right terms.